Inspection After Installation
Inspection After Completion of Installation
After completing the installation process, please follow the instructions in the separate "I-Robo 2 Installation Manual" to confirm that the installation has been performed correctly.
Perform the inspection together with a specialist in the presence of the customer.
Check Before Use
Before starting the device, please follow the checklist below to confirm that the environmental conditions for use are satisfied.
| No. | Item | Check details | Check |
|---|---|---|---|
| 1 | Are all device components installed in the designated locations? | Refer to Names and Functions of Each Part. | |
| 2 | Are the designated warning labels correctly attached to each device component? | Refer to Warning Label Locations. | |
| 3 | The temperature in the installation location of the device is within the appropriate range. |
Ambient temperature: 41 °F (5 °C) to 95 °F (35 °C)
|
|
| 4 | Is the installation location of the device not exposed to direct sunlight? | If there is no other option than to use the device in a location exposed to direct sunlight, be sure to install a sunshade to prevent direct sunlight from reaching the device. | |
| 5 | Is the water supply pressure within the appropriate range? | Water supply pressure: 0.3 MPa / 43.511 Psi or less | |
| 6 | Are the two drain hoses routed separately all the way to their outlets? | If they are combined into a single pipe midway, wastewater from the wash tank may backflow into the hot water tank and contaminate the rinse water. | |
| 7 | Is the exhaust system operating properly in the installation location? | Ventilate the device while it is in use. | |
| 8 | Is the LAN cable connected correctly? | If the cable is not correctly connected to the device, updates to the cooking menu or firmware may not be applied correctly. |
Before Using the Device for the First Time
When using the device for the first time after it was installed, be sure to clean it beforehand.
Daily Maintenance
- Although this device is cleaned before shipment, please clean it again as a precautionary measure. In particular, carefully clean items that come into direct contact with food such as the pot and spatula.